AUTONET TV

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com

Growing Old Together (Maintaining an Older Vehicle)

More and more of us are hanging on to our vehicles longer.  A company by the name of HIS Markit recently released a report that shows the average age of light vehicles in the U.S. is now 11.8 years.  Light vehicles are cars, SUVs (sport utility vehicles) and CUVs (compact utility vehicles). 

In Canada, the average life expectancy of a vehicle there is around 13 years, and in the U.S., it's around 15.  Vehicles are lasting longer these days, and there are several reasons for that.

One expert cites better technology and overall quality improvements.  While in past years, vehicles were made mainly of heavier steel components, more modern vehicles contain lighter magnesium and aluminum alloys, high-strength steel, polymers and carbon fiber.  They last longer and reduce the overall vehicle weight, and that can contribute to better fuel economy.

Modern internal combustion engine designs have been improved, and since they use more computers, they are more efficient with better performance.  Those factors also contribute to a longer-lasting powertrain.  In fact, it's not unusual to see a powertrain easily last 150,000 miles/250,000 kilometers or more with no major failures.

Drivers are also taking their vehicles in more regularly for periodic maintenance.  Choosing one service facility for all your maintenance can contribute to your vehicle's longevity, too, since technicians know your vehicle's repair and service history.

If you bought your vehicle taking out a 5-year loan and you keep it 11 years, you've managed 6 of those years without a payment, always a nice feeling.  Plus, a bonus is that you get very familiar with every aspect of that vehicle's sounds, smells, handling, stopping characteristics, visibility and limitations.  And the more familiar you are with your vehicle, the more confident you can be as a driver.

Westside Automotive
12510 Oxford Park Dr.
Houston, TX 77082
281-589-8984
http://www.houstonwestsideautomotive.com